Advertisement
1. To Set Clock
OPERATION
Plug the power supply cable into
wall receptacle.
Enter time of day (TOD) by tapping
appropriate number pads.
Example : To Set 11 : 25
*Tap 10 min pad once
* Tap 1 min pad once
* Tap 10 sec pad twice
*Tap 1 sec pad 5 times
Tap Clock Pad.
Tap Power Pad.(Exampie
: Tap
power select pad ohce for high
power setting.)
Tap Stop/Reset Pad.
Select HIGH
power and set for 5
seconds
by tapping the appropri-
ate pads.
(ist stage)
Set MED power for 4 seconds.
(2nd stage)
Set LOW power for 1 minute.
(ard stage)
Tap Power Select Pad 5 times and
{t] second pad once.
Tap Start Pad.
(ist stage)
(2nd stage)
FUNCTION
DISPLAY
—
* Coion starts blinking.
« Numbers tapped are displayed in the display window.
* Colon keeps blinking.
* Coton stops blinking and stays on.
* TOD has now been registered into the digital programmer
circuit and will count up by minutes.
* Clock time disappears.
* HIGH power indicator light turns on.
* The display window will show TOD again.
* Clock time disappears.
* HIGH Power indicator light turns on.
* Display window shows "5".
* First stage cooking time "5" and HIGH power indicator light
disappear.
* Oven beeps twice.
¢ MED power indicator light turns on.
¢ Display window shows "4".
* Second stage cooking time "4" and MED
power indicator
light disappear.
* Oven beeps twice.
* LOW power indicator light turns on.
* Display window shows "H 1".
:
NOTE: When
LOW
power Is selected, H meaning
Hour
appears in display window and cooking time is shown
in hours and minutes.
* Oven light turns on.
¢ Microwave activity starts.
* Third stage cooking time disappears.
* LOW power indicator light stays on.
* HIGH and MED power indicator lights turn on.
* Turntable begins to rotate.
¢ First stage cooking time "5" appears and counts down by
seconds.
* HIGH (1st stage) power indicator light begins to blink.
* After completing
1st stage program, oven
automatically
switches to 2nd stage.
* HIGH (1st stage) power indicator light turns off.
* MED (2nd stage) power indicator fight starts to blink.
* LOW (8rd stage) power indicator light remains on.
* Display window indicates "4" and starts counting down by
seconds.
—_
Turns on
HIGH
NE-9970, NE-9970C
NE-9870, NE-9870C
Advertisement
