Table of Contents
Advertisement
2.5.1
Exiting Emergency
The dispatch console that supports this feature can be programmed to clear the emergency state of
the radio. Check with your dealer or system administrator for more information on dispatch console
supporting this feature.
Procedure:
To exit emergency, press and hold the preprogrammed Emergency button for about a second.
2.5.2
Exiting Emergency as Supervisor (Trunking Only)
Radios configured as Supervisor are able to cancel emergency mode of other radios. The dispatch
console must be preprogrammed to use this feature. Check with your dealer or system administrator
for more information on dispatch console supporting this feature.
Procedure:
1 Perform one of the following actions:
If...
If the emergency mode is ini-
tiated by other radios,
If the emergency mode is ini-
tiated by the Supervisor,
NOTICE: The following buttons combinations are supported:
•
Radio Side Button 1 and Top (Orange) button.
•
Radio Side Button 1 and accessory Orange button.
•
Accessory 1-Dot Button and radio Top (Orange) button.
•
Accessory 1-Dot Button and accessory Orange button.
2.5.3
Sending an Emergency Alarm
When and where to use: This feature allows you to send a data transmission, which identifies the
radio sending the emergency, to the dispatcher.
NOTICE: The default timer of Emergency button press to activate Emergency is 50
milliseconds. This timer is programmable from 50–6200 milliseconds by a qualified technician.
Procedure:
Press the preprogrammed Emergency button.
One of the following scenarios occurs:
Then...
press and hold the Side Button 1 and press the Emer-
gency button.
Perform one of the following actions:
•
Press and hold the Emergency button.
•
Press and hold the Side Button 1 and press the
Emergency button.
•
Wait for console to clear emergency.
68012005016-DJ
Chapter 2: Advanced Features
49
Advertisement
Table of Contents
