Abus PPIC91000 Operating Instructions Manual page 8

Rear
ON/OFF and PAIRING button
Cover
*Wireless frequency: 2.4 GHz (802.11 b/g/n), max. transmission power 20 dBm
• The charging status LED flashes during the charging process. The LED is permanently
lit in red when fully charged and in wired operation, as well as during recording and
access to the live view in the app,.
• Any bracket with ¼" thread is supported.
Attention!
When operating permanently with the USB-C cable, the camera can only be used indoors
as protection against splashing water/rain is no longer provided with the cover open. This
will invalidate the camera's ability weatherproof capability.
USB-C port
Status LED
1/4" thread for bracket
Switching on the camera:
Press and hold the On/Off button for 3 seconds
until the camera issues a signal tone and the red
status LED lights up.
Switching off the camera:
Press and hold the button for 5 seconds.
8
English
Antenna
connection* (RP-SMA)