Hitachi VM-2300A Instruction Manual page 13

11. After recording, slide ""VCR/CAM"" select switch
to" VCR", and the camera/recorder will be now in
the stop mode.
"VCR/CAM" Select Switch
12. Press ""REW" button. The tape will be rewound to
the beginning.
13. Press PLAY" button. The picture you just re-
corded will be seen through the viewfinder and
sound can be heard by earphone (Not supplied).
NOTE: If you connect the camera/recorder to your
TV, you can see the picture played back on your
TV. Refer to "VIEWING THE PICTURE PLAYED
BACK ON YOUR TV" on page 36.
14. After playing, press "STOP" button.
"REW" Button
"PLAY" Button
15. Slide "POWER" ON/OFF switch to off and then
press "EJECT" button to remove cassette.
"POWER" ON/OFF Switch
"EJECT" Button
16. Always remove the power source from the
camera/recorder after use.
ET3