Compatibility; Setting Up The Lock Function - Bosch Kiox Original Operating Instructions

ance is deactivated. It can only be activated using the on-board computer as-
sociated with the eBike.
The Lock function is linked to your user account, which you can use to log
into the eBike Connect app. The user account allows you to use the Lock
function with an on-board computer, which in turn can be used to activate
the function on up to four eBikes.
Note that 2 hours must have passed in between any 2 activations of the Lock
function.
Caution! If you attempt to change a setting in the app, the on-board com-
puter or the portal, which could have negative consequences in combination
with the Lock function (e.g. deleting your eBike or user account), you will be
shown warning messages beforehand. Please read through these thor-
oughly and adhere to the warnings that are issued (e.g. before deleting
your eBike or user account).

Compatibility

The Lock function is compatible with these Bosch eBike product lines:
Drive unit
BDU3xx
BDU4xx

Setting up the Lock function

In order to be able to set up the Lock function, the following conditions must
be fulfilled:
– You have purchased the Lock function.
– The on-board computer is positioned in the holder on the eBike.
– The on-board computer is connected to the smartphone via Bluetooth®.
– The smartphone is connected to the Internet.
Go to the <My eBike> menu item in your eBike Connect app and set up the
Lock function for your eBike by sliding the <Lock feature> control to the
right.
Bosch eBike Systems
Product line
Active Line,
Active Line Plus,
Performance Line
Performance Line Speed,
Cargo Line, Cargo Line Speed,
Performance Line CX
1 270 020 Ken | (07.09.2023)
English – 23