Compatibility; Setting Up The Lock Function; How It Works - Bosch Nyon Original Operating Instructions

Compatibility

The Lock function is compatible with these Bosch eBike product lines:
Drive unit
BDU3xx
BDU4xx

Setting up the Lock function

In order to be able to set up the Lock function, the following conditions must
be fulfilled:
– You have purchased the Lock function.
– The on-board computer is situated in the holder on the eBike.
– The on-board computer is connected to the smartphone via Bluetooth®.
– The smartphone is connected to the Internet.
Go to the <My eBike> menu item in your eBike Connect app and set up the
Lock function for your eBike by sliding the control <Lock feature> to the
right.
From now on, you can deactivate the assistance from your drive unit by re-
moving the on-board computer. The drive unit assistance can only be reacti-
vated with the on-board computer that was used in the setup.
Even with the Lock function activated, you can continue to use your eBike
without assistance from the drive unit.

How it works

In combination with the Lock function, the on-board computer functions
similarly to a key for the drive unit. The Lock function is activated and deacti-
vated by respectively removing or inserting the on-board computer. The sta-
tus of the Lock function is indicated by a padlock symbol that appears on the
display of the on-board computer for approx. three seconds following its in-
sertion.
Remove the on-board computer from its holder whenever you are away from
the eBike so that the Lock function can fulfill its intended purpose.
Bosch eBike Systems
Product line
Active Line,
Active Line Plus,
Performance Line
Performance Line Speed,
Cargo Line, Cargo Line Speed,
Performance Line CX
1 270 U20 Nen | (02.10.2020)
English – 29