Selecting System Settings - Bosch Kiox Original Operating Instructions

Selecting system settings

Fit the on-board computer in the holder and proceed as follows while the
eBike is stationary:
Go to the status page (use the < button (10) on the operating unit to get to
the first display) and call up the <Settings> with the select button (9).
You can use the – (11) and + (12) buttons to select the setting you want.
You can open the settings, as well as any additional submenus, using the se-
lect button (9). You can use the < button (10) to go back to the previous
menu from any settings menu.
The following settings can be changed in the <Sys settings>:
– <Brightness>
The brightness can be adjusted in increments of 10% from 0–100%. The
values can be adjusted with the </> buttons and selected with the +/–
buttons. When the <Automatic> option is selected, the brightness auto-
matically adjusts to the ambient light.
– <Time>
The values can be adjusted with the </> buttons and selected with the
+/– buttons.
– <Date>
The current date can be set here.
– <Time zone>
The correct time zone can be selected here.
– <24h format>
This time format can be switched on or off.
– <Bright background>
The bright background can be switched on or off.
– <Imperial units>
If this option is switched on, imperial measurements are used (e.g. miles
instead of kilometres).
– <Language>
Here, the required language can be selected from the following options:
German, English, French, Spanish, Portuguese, Italian, Dutch, Danish,
Swedish.
– <Factory reset>
This menu item can be used to reset the on-board computer to factory
settings.
Bosch eBike Systems
English – 15
1 270 020 Ken | (07.09.2023)