Welcome to Episode® Speakers. We appreciate your purchase and are committed to providing the highest-quality products possible. The Episode® Soundbar models are a superb choice for almost every type of home theater or home audio installation. They have been designed with advanced technological components that allow for high performance and a lifetime of enjoyment.
Page 6
page | 6 Adjusting the Kickstand 11° 0° After installing the kickstand and placing the Soundbar, adjust the angle of the speakers towards the listener’s ears. If the speakers point away from the listener’s ears, slide the kickstand up or down to achieve the proper angle. Note that the kickstand can be inverted when the Soundbar is pointing down.
Page 8
2. Position the provided template on the wall in the desired location of the speaker. If the location does not allow for this, use a wall molly or anchor with the appropriate weight rating for the Soundbar. 3. Level the template and mark the wall with the screw locations. Ver�cal Horizontal ES-350-OWLCR-M Moun�ng Template www.snapav.com Support 866.838.5052 www.snapav.com Support 866.838.5052...
page | 10 To maintain accurate IR reception, a spacer has been included to allow for the front edge of the IR receiver to be flush with the back of the grille cloth. This will ensure that IR reception is at its maximum level. TIP: With some IR receivers, a layer of electrical tape around the threads can create a more snug fit within the Soundbar...
TROUBLESHOOTING Episode amplifiers are designed to function trouble-free. Most problems that occur are due to simple issues. If having trouble, check the list of simple fixes below. If the problem persists, contact Episode technical support at 866-838-5052. • Power cable to the amplifier is incorrectly connected or plugged into an outlet that does not have power.