Protection
10:48
1/11
Common
Active Group
1
*Copy Group(A->B) >
Group 1
Group 2
Copy Group(A->B)
10:48
1/2
A (1 – 8):
3
*B (1 - 8):
2
[◄]
Protection
Copy Group?
ENTER=Yes
CANCEL=No
Change group settings: Upon shipment from the factory, the default settings
are set. Therefore, in each group, the user can change the settings of the
protection functions and other features. To change the settings in each group,
refer to the setting method discussed in Chapter 12.5(i).
Configuration of Function keys
(v)
Function keys (F1 to F5) provide a feature to navigate to a specific screen, which is configurable
by the user. Destinations will be configured at respective function keys. Table 5.7-4 shows
Copy Group(A->B)
10:48
_A (1 – 8):
[►]
+
B (1 - 8):
[◄]
>
>
Copy Group(A->B)
10:48
[ENTER]
1/2
A (1 – 8):
+
*B (1 - 8):
+
Figure 12.5-12 Copy group setting
- 1006 -
1/2
+
[▼]
3
+
1
[▲]
[▲]
+
3
[►
+
2
]
[ENTER]
6F2T0207 (0.01)
Copy Group (A->B)
10:48
1/2
A (1 – 8):
+
3
_B (1 - 8):
+
1
[ENTER]
Copy Group(A->B)
10:48
1/2
A (1 – 8):
+
3
B (1 - 8):
+
1
The changed
setting is confirmed.
Protection
10:48
1/11
Common
Active Group
>
1
Copy Group(A->B) >
Group 1
>
Group 2
>
GRE200 (5,6)