Advertisement
Event Record1
10:48
#1 2012-07-25
10:48:21.223
Set. Group change
2
#2 2012-07-25
10:20:11.021
Clear of Event Records
Record
10:48
Fault Record
_Event Record 1
Event Record 2
Event Record 3
Disturbance Record >
Clear all Records +
Event Record1
10:48
Record List
_Clear Records
Event Record1
Clear records?
ENTER=Yes CANCEL=No
Disturbance Record
(iii)
LCD screen can display the recorded date and times, which are memorized in the IED. All
disturbance data, as shown in the following example, will be displayed:
Figure 12.3-4 Display of Disturbance Record
Note: GR-TIEMS can display the data graphically on the PC screen. See Chapter
Recording function
3). Press ▲ or ▼ to move display items.
1/3
1). Move cursor to Event Record 1, 2, or 3 sub menu and press ►.
To clear all records, refer to section (i)-3.
2/6
>
>
>
>
2). Event Record screen is displayed. Press ENTER at the Clear
Records sub menu.
1/2
>
+
3). Clear all Event records if ENTER is pressed. Back to display of
Event Record directly if CANCEL is pressed.
Disturbance record
10:48
#1
2012-07-25
10:48:04.223
#2
2012-07-21
01:15:55.018
#3
2012-07-20
13:11:29.621
(→p. 752) for more details.
- 987 -
1/6
6F2T0207 (0.01)
GRE200 (5,6)
Advertisement
