Defining SBO mode
Figure 4.2-53 exemplifies the DPOS01 logic node saved as "CSWI4". In the SBO mode, the user
should select the following items for the "CSWI4$Pos" using GR-TIEMS:
Figure 4.2-53 LN editing screen for SBO mode (for example)
Defining DIR mode
Figure 4.2-54 exemplifies the DPOS01 logic node saved as save as "CSWI4". In the DIR mode,
the following three items should be selected using GR-TIEMS.
Figure 4.2-54 LN editing screen for DIR mode (for example)
SBOw
✓
Oper
✓
Cancel
✓
Origin
✓
stSeld
✓
sboClass† (choice "operate-once")
✓
ctlmodel (choice "SBOes or SBOns")
✓
†"sboClass" can be found by scrolling down.
Oper
✓
origin
✓
ctlmodel (choice "DOes or DOns" )
✓
- 545 -
6F2T0207 (0.01)
GRE200 (5,6)