Table of Contents
Advertisement
OPERATION
MOWING TIPS
When to Mow
Most grasses should be mowed when they have grown ½ to 1 inch
above their recommended height. More frequent mowing is required
for mulching than for bagging. For best mulching results, you may
need to mow the lawn twice a week during the growing season.
Cutting Height
Consult a local nursery or lawn and garden center for cutting height
recommendations and advice about specific types of grasses and
growing conditions in your area.
Most grass has stems and leaves. If you cut off the leaves, you'll scalp
the lawn. Let the grass recover between mowings. Your mower will
work better, and your lawn will look better.
If your grass gets too tall, cut it once at the highest cutting height
setting, then mow again in 2 or 3 days. Don't take off more than one
third of total grass height in any one mowing, or brown patches may
develop. Cutting height adjustment is explained on page 10.
Cutting Width
For an even lawn finish, overlap each mowing swath by a few inches. If
the grass is very tall or thick, use more overlap and a narrower mowing
swath.
Blade Speed
The blade must spin very fast to cut properly. Always use the FAST
throttle setting. If engine speed drops, it could mean the engine is
being overloaded by the blade trying to cut too much grass. Mow a
narrower swath, move the mower slower, install the discharge chute,
or raise the cutting height.
Blade Sharpness
A sharp blade cuts cleanly. A dull blade tears the grass, leaving
shredded ends that turn brown. When your blade doesn't cut cleanly
anymore, have it sharpened or replaced.
23
E
Advertisement
Table of Contents
