Install Pixel Cards; Figure 64: Service Tool; Figure 65: Pixel Card; Figure 66: Pixel Card Positions In A Cabinet - NEC LED-FA025i2-220 User Manual

6.6

Install Pixel Cards

This section is a guide to the installation of the Pixel cards.

Table 12: Pixel Card Installation Requirements

No. of People 1
Prerequisites Cabinets installed, levelled, locked and connected
Check to ensure Power supply & Ethernet are connected
Tools ESD gloves
Service tool
Equipment Pixel cards
Notice
Use the included white ESD gloves when handling Pixel cards to prevent static electricity from
the human body and contamination due to finger oils, perspiration salts, flaking skin, and/or
other forms of human excretory secretions.
The LED modules and their electrical components are sensitive to biological agents and exposure
to such risks degradation of materials and performance.
Eliminate any static electricity from your body before touching the Pixel cards by touching an
aluminum sash, a door knob, or some other metal object.
Pixel cards use a combination of magnets (Figure 65, B), corner click-pins (A) and the Pixel card
connector (C) to attach to the cabinets.
No cable connections are required to install Pixel cards.
Install the Pixel cards in the locations indicated in Figure 66. Follow the steps below.

Figure 65: Pixel Card

A
B
C

Figure 66: Pixel Card Positions in a Cabinet

Figure 64: Service Tool

54