Figure 91: Transferring The Calibration Data; Figure 92: Selecting The Screen For Calibration - NEC LED-FA025i2-220 User Manual

Step 6) Send the data from the reception card to the computer.
Select Screen and then click Save (Figure 91).
The data transfer begins. The transfer takes approximately 2 hours and 20 minutes.
When the screen indicating that the transfer finished successfully is displayed, click OK.
Click Return (Figure 91).

Figure 91: Transferring the calibration data

Step 7) Under Current Screen, select the screen for calibration.
Step 8) Enable calibration.
Under Enable/Disable Calibration, select Chroma Calibration and then click Save
(Figure 92).
Step 9) Open the data transfer screen.
Click Upload coefficients (Figure 92).

Figure 92: Selecting the screen for calibration

68