Page 2
For more information: iwant@showtec.info You can get some of the best quality, best priced products on the market from Showtec. So next time, turn to Showtec for more great lighting equipment. Always get the best -- with Showtec ! Thank you!
Page 3
Showtec Showtec Star LED Product Guide ™ Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Return Procedure ................................5 Claims ....................................5 Description of the device ..............................6 Set Up and Operation ............................... 6 Maintenance ..................................
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: • Showtec Star LED with powercable 1,1m • User manual LED Expected Lifespan LEDs gradually decline in brightness over time.
Page 5
Do not switch the device on and off in short intervals, as this would reduce the device’s life. Do not shake the device. Avoid brute force when installing or operating the device. The Star LED reacts very sensitive to movement.
Always let the installation be carried out by an authorized dealer ! Procedure: If the Star LED is lowered from the ceiling or high joists, professional trussing systems have to be used. Use a clamp to mount the Star LED, with the mounting-bracket, to the trussing system.
Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Do not attempt to operate a 120V specification product on 230V power, or vice versa. Remove all packing materials from the Star LED. Check that all foam and plastic padding is removed. Always disconnect from electric mains power supply before cleaning or servicing.
4. If all of the above appears to be O.K., plug the unit in again. 5. If you are unable to determine the cause of the problem, do not open the Star LED, as this may damage the unit and the warranty will become void.
Product Specification Model: Showtec Star LED Power: 240V-50Hz (CE) Power consumption: 13 Watt LED system: 2x RGB 3in1 3 Watt with chip on board Music-controlled via built-in microphone High power LED-effect Rotation: 15 rpm Plug & Play Stand-alone Fuse 1A / 250V Dimensions: Ø195x160mm (DxH)
Need help?
Do you have a question about the Star LED and is the answer not in the manual?
Questions and answers