Save the carton and all packing materials. In the event that the fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showtec 4x LED Strip RGB 40cm ● Power adapter ● RGB controller ●...
Page 4
• If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
LED Strip Set 4x 40cm RGB Operating Determinations ● This device is not designed for permanent operation. Regular operation breaks will ensure that the device will serve you for a long time without defects. ● The minimum distance between light-output and the illuminated surface must be bigger than 0,5 meter.
LED Strip Set 4x 40cm RGB Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
LED Strip Set 4x 40cm RGB Description of the device Features The Showtec LED Strip Set 4x40 cm RGB is a set of 4x 40cm RGB LED-strips which are easy to install. It can be controlled by the included IR remote control. ●...
LED Strip Set 4x 40cm RGB Installation Remove all packing materials from the LED Strip Set 4x 40 cm RGB. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing.
LED Strip Set 4x 40cm RGB Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa. Remote control The remote control will sent a signal to the IR-sensor cable from the RGB controller, see figure 03.
Page 10
LED Strip Set 4x 40cm RGB Button Function Description Increase Increase the intensity of the LEDs Decrease Decrease the intensity of the LEDs Switch the LED strips off Switch the LED strips on Activate the Red color Green Activate the Green color Blue Activate the Blue color White...
04) If you are unable to determine the cause of the problem, do not open the LED Strip Set 4x 40cm RGB, as this may damage the unit and the warranty will become void. 05) Return the device to your Showtec dealer. Problem Probable cause(s) Solution •...
LED Strip Set 4x 40cm RGB Product Specifications Model: Showtec LED Strip Set 4x 40 cm RGB Power supply: 12V, 1,5A Power consumption: Protection rate: IP20 Dimensions: 400 x 10 x 8 mm (LxWxH) per strip Weight: 0,40 kg (complete set)
Need help?
Do you have a question about the LED Strip Set 4x 40cm RGB V1 and is the answer not in the manual?
Questions and answers