Controller Setup - Omron V460-H Series Network Connection Manual

12
Finally, check the version
number of the code reader. Click
on the gear icon on the upper
right of the screen and select
About WebLink.
13
You can check the current
version of the code reader in
About WebLink
HH
Update the code reader to the
latest version as needed.

7.3. Controller Setup

Set up the controller.
7.3.1. Setting the IP Address
Start the Sysmac Studio and set the IP address of the controller.
Install the Sysmac Studio on the PC beforehand.
.
7. EtherNet/IP Connection Procedure
20