Adjusting The Projected Image ("Scr - Adj" Menu); Setting The Resize Mode; Adjusting The Image Position; Keystone Correction - Sharp PG-F267X Operation Manual

Adjusting the Projected Image
("SCR - ADJ" Menu)

1 Setting the Resize Mode

Note
• For details of the Resize mode, see pages
31 and 32.
• You can also press RESIZE on the remote
control to set the resize mode. (See page 31.)
2 Adjusting the Image
Position
You can move the projected image vertically.
O button
Note
• This function only works in some RESIZE
modes. (See pages
44
Pict. SCR-ADJ
1
Resize
2
Image Shift
3
Keystone
4
OSD Display
5
Background
6
Setup Guide
7
PRJ Mode
8
Language
SEL./ADJ.
Q button
31 and 32.)
Menu operation n Page
PRJ Net. Help
Border
0
0
On
Logo
On
Front
English
ENTER END

3 Keystone Correction

When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted trapezoidally.
The function for correcting trapezoidal distortion
is called Keystone Correction.
Select "Keystone" on the "SCR-ADJ"
menu and adjust with the slide bar.
See page 29 for details of Keystone Correction.
Q button
Note
• The Keystone Correction can be adjusted up
to an angle of approximately ±22 degrees
(when "Resize" is set to "Normal").
•
You can also press KEYSTONE on the
remote control or on the projector to adjust
Keystone Correction.
4 Setting the On-screen
Display
Selectable
items
On All on-screen displays are displayed.
Off INPUT/VOLUME/AV MUTE/FREEZE/
AUTO SYNC/RESIZE/PICTURE
MODE/ECO+QUIET/MAGNIFY/ "An
invalid button has been pressed." are
not displayed.
39
O button
Description