Advertisement
Step 2:
Mounting of Rear End Bracket (3) Orient the
Rear End Bracket, as shown, and slip-in the
Long Bolt (Original Equipment – already
available in the Motorbike) through the
holes as shown, and secure the threads,
using the Hexagonal Nut (again Original
Equipment – already available in the
Motorbike) from the other side.
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
Step 1:
Remove the Cover already installed in
the Motorbike. This will allow access to
the Mounting Holes for fitment of SRC
Engine Guard
Page 3
Advertisement
