SRC H-CRF250L-09-01-AL Manual page 4

Rear End Bracket in "As is mounted
condition"
Copyright By SRC
Design and Specification are subjected to change
Step 3:
Mounting the Engine Guard
Orient the Engine Guard for
mounting it to the Rear End
Bracket, as shown.
Slip-in the Taper Ring – 2 off and
M6 x 20 Screw (9) – 2 off and
secure the threads using Nut M6
(8) – 2 off, from the other side of
the Rear End Bracket, as shown.
Page 4