Advertisement
Quick Links
Scope of Supply/Bill of Material & Mounting Drawings
Part Number: H-CRF300L-02-01-SL / H-CRF300L-02-02
Part Description: Radiator Guard – HONDA CRF300 L
Installation / Parts List / Bill of Material for Mounting
NO.
Radirtor Guard
1
Screw M6x25
2
Washer M6
3
4
Rubber Tape
5
Washer M5
6
Screw M5x16
7
Hex flange nut gradea M5
SRC Design uses Metric System of Measu reme nt and all dimensions in Millimeters
* Recommended to use the T orque specified in the table
**Deno tes Usage of Liquid Thread Locker in specified Locations
Copyright By SRC
Design and Specification are subjected to change
Description
Quantity
T orque * (N-M)
1
9-10
2
2
2
1
1
5- 6
1
Rema rks **
Chacklist
Page 1
Advertisement
Related Manuals for SRC H-CRF300L-02-01-SL
Summary of Contents for SRC H-CRF300L-02-01-SL
- Page 1 5- 6 Hex flange nut gradea M5 SRC Design uses Metric System of Measu reme nt and all dimensions in Millimeters * Recommended to use the T orque specified in the table **Deno tes Usage of Liquid Thread Locker in specified Locations...
- Page 2 Mounting Instructions Step 1: Remove the original screws, pin, and remove the original guard before starting to mount SRC Radiator Guard (as show) Step 2: Orient the Radiator Guard (1) and Slip-in the washer M6 (3)-2 off, Screw M6x25 (2)-2 off, (Shown in “Red”...
- Page 3 Vehicle. It is always advised to check loosening of the fasteners after the first 50 kilo meters of ride and at regular intervals. We are showing here the Scope of Supply/ Installation/Parts list & BOM from SRC To the maximum extent possible, our design use the current Mounting/Fitment of the...