SRC H-CRF17-10-01 Installation Instructions

Scope of Supply/Bill of Material & Mounting Drawings

Part Number: H-CRF17-10-01

Part Description: SPOT LIGHT FIXTURE- HONDA CRF250 RALLY

Installation / Parts List / Bill of Material for Mounting

No. Description

1 Additional Side Light Bracket

2 Spacer

3 Spacer

4 Spacer

5 Washer M6

6 Screw M6 x 20

7 Screw M6 x 25

8 Screw M6 x 45

SRC Design uses Metric System of Measurement and all dimensions are in Millimeters

* Recommended to use the Torque specified in the table

** Denotes Usage of Liquid Thread Locker in specified locations

Design and Specification are subjected to change

Quantity Torque * (N-m) Remarks **

9 - 10

Use Liquid Thread Locker

Page 1

Table of Contents

Need help?

Do you have a question about the H-CRF17-10-01 and is the answer not in the manual?

Page 1 9 - 10 Use Liquid Thread Locker SRC Design uses Metric System of Measurement and all dimensions are in Millimeters * Recommended to use the Torque specified in the table ** Denotes Usage of Liquid Thread Locker in specified locations...
Page 2 MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3 Slip-in Spacer (3) -1 off, Washer M6 (5) – 1 off and Screw M6 x 45 (8) – 1 off, as shown, and secure the threads in the mounting hole, shown in Red colour. Copyright By SRC Design and Specification are subjected to change Page 3...
Page 4 Mounting holes and secured threads can be tightened to torque, as per specifications in the BOM table. Final mounted condition of the Side Light stand, is as shown in the drawing. Copyright By SRC Design and Specification are subjected to change Page 4...
Page 5 Vehicle. It is always advised to check loosening of the fasteners after the first 50 kilo meters of ride and at regular intervals. 7. We are showing here the Scope of Supply/ Installation/Parts list & BOM from SRC 8. To the maximum extent possible, our design use the current Mounting/Fitment of the...