Noise Emission; Vibration - Panduit PDM Operation Manual

© Panduit Corp. 2013
5C: Noise Emission
The noise emission, measured in accordance with EN620745-1: 2009
Surface sound pressure level [dB(A) re. 20µPa]
K1 (correction for background noise)
K2 (correction for test environment)
10 log S / So (r=1m)
Measured sound power level LwA [db(A) re 1pW]
5D: Vibration
The vibration total value and its uncertainty measured in accordance with EN60745: 2009
Vibration Peak Value Avg. ahv:
The following information:
•
That the declared vibration total value has been measured in accordance with a standard test method
and may be used for comparing one tool with another;
•
That the declared vibration total value may also be used in a preliminary assessment of exposure.
A warning:
•
That the vibration emission during actual use of the power tool can differ from the declared total value
depending on the ways in which the tool is used; and
•
Of the need to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
OPERATION MANUAL
Page: 9 of 39
PAT1M, PAT1.5M, PDM
ENGLISH
73.3
0
0
11
84.3
2
0.411 m/s