68015000924_a.fm Page 3 Tuesday, August 14, 2012 3:00 PM
Display
1
2
3
4
5
1. Dual Watch Indicator
2. Transmit/Receive
Indicator
3. Channel Indicator
4. Volume Level Indicator
5. VOX/Room Monitor
Indicator
6. Scan Indicator
Installing the Battery
1. Make sure your radio is turned OFF.
2. To remove the battery compartment door, press the tab at
3. Install the NiMH batteries into the battery compartment.
4. Replace the battery compartment door.
6
Battery Level and Low Battery Alert
7
8
9
10
Charging the Radio
11
Using the Charging Cradle :
12
1. Make sure your radio is turned OFF.
2. Connect the AC adapter to the DC IN 9V of the charging
7. Battery Level Meter
3. Place the charging cradle on a stable surface.
8. Sub-code Indicator
4. Place the radio in the charging cradle with the keypad facing
9. Up timer Indicator
10.APO (Auto Power Off)
5. LED indicator will illuminate and remain illuminated as long
Indicator
11. Keypad Lock Indicator
Note: Charge the battery pack for 16 hours.
12.Call Tone Indicator
Using the Battery Support Bracket :
1. Remove the rechargeable NiMH battery pack from the radio.
2. Place the battery support bracket into the charging cradle.
3. Install the NiMH battery pack into the charging cradle.
4. LED indicator will illuminate and remain illuminated as long
Note: Charge the battery pack for 16 hours.
the bottom of the compartment door.
Indicates that the battery is fully charged.
Blinks when battery is low; charge the radio
or replace batteries immediately.
cradle.
forward.
as the radio is in the charger.
Ensure that the charging contacts are correctly aligned.
as the radio is in the charger.
3