Installing The Battery; Battery Level And Low Battery Alert; Charging The Radio - Motorola TLKR T60Z Owner's Manual

Display
1
2
3
4
5
1. Dual Watch Indicator
2. Transmit/Receive
Indicator
3. Channel Indicator
4. Volume Level Indicator
5. VOX/Room Monitor
Indicator
6. Scan Indicator
6
7
8
9
10
11
12
7. Battery Level Meter
8. Sub-code Indicator
9. Up timer Indicator
10.APO (Auto Power Off)
Indicator
11. Keypad Lock Indicator
12.Call Tone Indicator

Installing the Battery

1. Make sure your radio is turned OFF.
2. To remove the battery compartment door, press the tab at
the bottom of the compartment door.
3. Install the NiMH batteries into the battery compartment.
4. Replace the battery compartment door.

Battery Level and Low Battery Alert

Indicates that the battery is fully charged.
Blinks when battery is low; charge the radio
or replace batteries immediately.

Charging the Radio

Using the Charging Cradle :
1. Make sure your radio is turned OFF.
2. Connect the AC adapter to the DC IN 9V of the charging
cradle.
3. Place the charging cradle on a stable surface.
4. Place the radio in the charging cradle with the keypad facing
forward.
5. LED indicator will illuminate and remain illuminated as long
as the radio is in the charger.
Note: Charge the battery pack for 16 hours.
Using the Battery Support Bracket :
1. Remove the rechargeable NiMH battery pack from the radio.
2. Place the battery support bracket into the charging cradle.
3. Install the NiMH battery pack into the charging cradle.
Ensure that the charging contacts are correctly aligned.
4. LED indicator will illuminate and remain illuminated as long
as the radio is in the charger.
Note: Charge the battery pack for 16 hours.
3