Advertisement
HAND SHOWER INSTALLATION
- Apply a ring of silicone caulking around the hole designated for the hand held shower.
1
Do not use plumber's putty, which can damage finish.
- Remove the hardware from Base Flange. Slip the Base Flange through the appropriate
2
hole in deck. From underneath attach the Metal Washer and Brass Lock nut. Tighten
firmly to avoid leakage.
- From underneath the deck attach the larger side of the 57" hose to the Spout Diverter
3
valve. Slip the smaller end of the hose up through the base flange and connect to the
hand held shower. Tighten both ends firmly to avoid leakage.
The measurements shown are for reference only. Products and specifications shown are subject to change without notice.
www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681
3/7
Advertisement
