Electrical Connection - GEM 533 eSyStep Operating Instructions Manual

8 Electrical connection

7.7.4 Digital output signals
Outputs:
Type of contact:
Switching voltage:
Switching current:
Short-circuit proof:
7.7.5 Communication
Interface:
Function:
Transmission rate:
Frame type in Operate:
Min. cycle time:
Vendor-ID:
Device-ID:
Product-ID:
ISDU support:
SIO operation:
IO-Link specification:
IODD files can be downloaded via https://ioddfinder.io-link.com/ or www.gemu-group.com.
7.7.6 Behaviour in the event of an error
Function:
Error position:
8 Electrical connection
Appropriate cable socket/appropriate mating connector
▶ The appropriate connectors are included for X1 and X2.
GEMÜ 533 eSyStep
Positioner (Code S0)
Function selectable via IO-Link (see table Overview of available functions – Input and output sig-
nals)
Push-Pull
Power supply Uv
≤ 140 mA
Yes
IO-Link
Parameterization/process data
38400 baud
2.V (eSyStep positioner, code S0, S5, S6),
PDout 3Byte; PDin 3 Byte; OnRequestData 2 Byte
20 ms (eSyStep positioner, code S0, S5, S6)
401
1906801 (eSyStep positioner, code S0, S5, S6),
eSyStep Positioner (code S0, S5, S6)
Yes
Yes
V1.1
In the event of an error the valve moves to the error position.
Notes: Moving to the error position is only possible with full power supply. This behaviour is not a
safety position. The valve must be operated with a GEMÜ 1571 emergency power supply module
(see accessories) to ensure the function in case of voltage loss.
Closed, open or hold (adjustable via IO-Link).
NOTICE
16 / 64 www.gemu-group.com