Precautions; Features - Sony LMT-100 Operating Instructions Manual

Precautions

On safety
• Operate the unit on 100 – 240 V AC, 50/60 Hz.
• Should any liquid or solid object fall into the cabinet,
unplug the unit and have it checked by Qualified Sony
Service Personnel before operating it further.
• Unplug the unit from the wall outlet or turn off the power
switches on the front and rear of the unit if it is not to be
used for several days.
• To disconnect the cord, pull it out by the plug. Never pull
the cord itself.
• The wall outlet should be near the unit and easily
accessible.
• The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet and
the main power switch is turned on.
• Do not place your hand or objects near the ventilation
holes. The air coming out is hot.
• Have at least two people carry and handle the unit, to
avoid accidents or injury.
• Avoid using an extension cord with a low voltage limit,
as it may cause short-circuiting and physical injury.
• To carry the unit, be sure to hold the bottom of the unit.
• Do not catch your finger between the unit and surface of
the floor when moving the unit installed on the floor.
• Be careful not to catch your finger in the cooling fan.
On cleaning
To keep the cabinet looking new, periodically clean it with
a soft cloth. Stubborn stains may be removed with a cloth
lightly dampened with a mild detergent solution. Never
use strong solvents, such as thinner, benzene, or abrasive
cleansers, since these will damage the cabinet.
On repacking
Save the original shipping carton and packing material;
they will come in handy if you ever have to ship your unit.
For maximum protection, repack your unit as it was
originally packed at the factory.

Features

The LMT-100 Media Block is a server located in a theater
that offers the capability of digital cinema exhibition in
combination with the SRX-R110 or SRX-R105 SR
projector.
Compliant with DCI (Digital Cinema
Initiative, LLC)
The LMT-100 supports the DCI specifications. The unit is
available with playback of the 4K (4096 × 2160) or 2K
(2048 × 1080) JPEG2000 video files included in DCP
(Digital Cinema Package) of digital cinema distribution.
The unit is also available with output of digital video
signals to the connected SR projector.
Up to 16 channels digital audio playback
The LMT-100 plays back the audio files included in DCP
and outputs up to 16 channels AES/EBU digital audio
signals to the connected digital audio signal processor.
Supporting SMS (Screen Management
System) application software
Connection with a computer with the SMS application
software installed allows you to control operations of a
digital cinema exhibition in a theater from the computer, or
to perform a digital cinema test exhibition, etc.
Capable of exhibition of cinema sources
other than digital cinema distribution
The LMT-100 is equipped with an input board slot.
Installing an optional input board such as an HD-SDI or
DC-SDI input board allows the unit to input the cinema
sources from external equipment.
Note on software licenses
Before using this unit, read the notice concerning software
licenses (pages 24 to 38) at the end of the Operating
Instructions.
By using this unit, you will be deemed to have understood
and agreed to the content of the notice.
17
Precautions / Features