Precautions; Specifications - Sony TDM-NC1 Operating Instructions Manual

Wireless network audio adapter
Hide thumbs Also See for TDM-NC1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Precautions

On safety
Should any solid object or liquid fall into the system,
unplug the system and have it checked by qualified
personnel before operating it any further.
On placement
• Do not place the unit in an inclined position.
• Do not place the unit in locations where it is;
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Subject to vibrations
– Subject to direct sunlight
– Subject to microwave.
• Use caution when placing the unit on surfaces that
have been specially treated (with wax, oil, polish,
etc.) as staining or discoloration of the surface may
result.
On heat buildup
• Although the unit heats up during operation, this is
not a malfunction.
• Place the unit in a location with adequate ventilation
to prevent heat buildup in the unit.
If you have any questions or problems concerning your
unit, please consult your nearest Sony dealer.
Cleaning the unit
Clean the unit, panel and controls with a soft cloth
slightly moistened with mild detergent solution. Do not
use any type of abrasive pad, scouring powder or
solvent such as thinner, benzine or alcohol.

Specifications

Output
Audio:
Video:
Network
Wired:
Wireless:
General
Power requirements:
Dimensions (w/h/d):
Mass:
Cable length:
Design and specifications are subject to change
without notice.
1 Vrms (stereo, via
DIGITAL MEDIA PORT)
1 Vp-p 75 ohms (VIDEO
OUT jack or via DIGITAL
MEDIA PORT)
Modular jack 10 BASE-T/
100 BASE TX
Standard: IEEE802.11b/g
Channels: CH1 to CH11
DC IN: 5 V, 700 mA (via
DIGITAL MEDIA PORT)
Approx. 75 × 76 × 75 mm
(3 × 3 × 3 inches)
Approx. 0.3 kg (11 oz)
2 m (6 ft)
GB
41

Advertisement

Table of Contents
loading

Table of Contents