Hard Drives - HP ProDesk 600 G4 SFF Maintenance And Service Manual

Hard drives

Follow these steps to remove a 2.5-inch hard drive:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Disconnect the power cable (1) from the 2.5-inch hard drive.
4. Disconnect the data cable (2) from the 2.5-inch hard drive.
5. Release the retention clip (1) that secures the 2.5-inch drive cage to the main drive cage.
6. Slide the 2.5-inch hard drive cage to the left as far as it will go, and then remove the 2.5-inch hard drive
cage (3).
32 Chapter 4 Removal and replacement procedures
Preparation for disassembly on page
Access panel on page 29).
28).