Operation (manual mode)
Switching Power management on/off
You can deactivate Power
management.
Keep in mind that this may increase
energy consumption.
Switch off the fan and the lighting.
Press the run-on control for
approx. 10 seconds, until the
indicator for power setting 1 lights up.
Then press in turn:
– the lighting control ,
– the control, and then again
– the lighting control .
If Power management is switched on,
the 1 and B indicators light up
constantly.
When it is switched off, the 1 and B
indicators flash.
Press to switch Power
management off.
The 1 and B indicators will flash.
Press the control to switch it on.
The 1 and B indicators will light up
constantly.
Confirm the setting by pressing the
run-on control .
All the indicator lights will go out.
If you do not confirm your selection
within 4 minutes, the rangehood will
automatically revert to the previous
setting.
32
Safety switch-off
If Power management has been
deactivated, the rangehood will switch
itself off automatically after 12 hours if it
has been left on (fan and cooktop
lighting).
To switch it back on press the On/
Off control or the lighting
control .
Need help?
Do you have a question about the DA 2578 and is the answer not in the manual?
Questions and answers