Miele DA 2578 Operating And Installation Instructions page 25

Table of Contents

Advertisement

 To activate Con@ctivity 2.0 press the
 control.
2 will light up constantly, 3 will flash on
and off.
After a few seconds 2 and 3 will light up
constantly, B will flash on and off.
The search for a radio frequency
connection will start.
Activating the cooktop
 While the rangehood is searching for
a signal, start activating the cooktop.
For further details, see the cooktop
operating instructions.
 When the cooktop registers that a
connection has been established, exit
activation on the cooktop.
Before using for the first time
Finishing activation on the
rangehood
When successfully connected B will go
out, and 2 and 3 will light up constantly.
 Confirm activation with the run-on
control . All the indicator lights will
go out.
The Con@ctivity 2.0 function is now
ready for use.
If you do not confirm your selection
within 4 minutes, activation will not take
place.
You only need to carry out the
activation procedure once. If the
appliances are disconnected from the
electricity supply, for example during a
power cut, they will still remain
activated.
25

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DA 2578 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Da 2558Da 2518Da 2558 extDa 2578 ext

Table of Contents