Con@Ctivity With Radio Frequency Connection (Con@Ctivity 2.0) - Miele DA 2578 Operating And Installation Instructions

Table of Contents

Advertisement

 Start Wi-Fi connection on the
cooktop. For further details, see the
cooktop operating instructions.
When successfully connected 2 and 3
will light up constantly.
 Quit connection mode on the
rangehood by pressing the run-on
control .
Con@ctivity has now been activated.
With a direct Wi-Fi connection, it is not
possible to connect the cooktop and
the rangehood to a home network.
Should this be required at a later date,
the direct Wi-Fi connection between
the cooktop and the rangehood must
be disconnected (see "Signing out of
Wi-Fi").
Before using for the first time
Con@ctivity with radio frequency
connection (Con@ctivity 2.0)
Prerequisite:
– Con@ctivity 2.0 enabled Miele
cooktop
This rangehood is supplied with a
Con@ctivity 2.0 radio frequency
stick .
The radio frequency stick can only be
used with cooktops that are fitted with a
slot for the radio frequency stick to
operate the Con@ctivity function.
 Check the installation instructions for
the Con@ctivity 2.0 stick to ensure
that it is compatible with your
cooktop.
Please note that you cannot set up a
Wi-Fi connection at the same time as
the radio frequency Con@activity 2.0
system.
23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DA 2578 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Da 2558Da 2518Da 2558 extDa 2578 ext

Table of Contents