Miele DA 2578 Operating And Installation Instructions page 43

a 1 exhaust socket for exhaust
ducting  150 mm.
b 1 reducing collar for exhaust
ducting  125 mm.
c 1 connector for flat ducting to the
rear or the side (only for EXT
models).
d Conversion kit for recirculation
mode (the conversion kit is not
supplied and must be ordered
separately; see "Technical data").
The kit contains an exhaust grille
and aluminum hose with hose clips.
3.5 x 16 mm screws for securing the
rangehood.
The screws supplied are intended for
securing the rangehood to a solid
wooden cabinet floor with a
minimum thickness of 16 mm.
Ensure the cabinet floor can
permanently support the weight of
the appliance.
Keep the following in a safe place:
Installation instructions
1 lever
for replacing lamps.
Installation
43