Download Print this page

General Cleaning - Aktakom ASE-1112 Instruction Manual

Temperature controlled soldering station

Advertisement

GENERAL CLEANING

The outer case of the iron or station may be cleaned with a damp cloth using
small amounts of liquid detergent. Never submerse the unit in liquid or allow
any liquid to enter the case of the station. Never use solvent to clean the case.
The appliance is not a toy, and must be kept out of children's hands.
1.
Before cleaning the appliance or changing the filter, always remove the
2.
power lead plug from the socket. Unscrewing the housing is not permitted.
This appliance is not intended for use by persons (including children) with
3.
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
If the supply cord is damaged, it must be replaced by the manufacturer or
4.
its service agent or a similarly qualified person in order to avoid hazard.
6
www.tmatlantic.com

Advertisement

loading