Advertisement
Do not touch any other area but the handle when the soldering iron is working.
It is very hot!
Do not leave children alone in the presence of the soldering iron.
Soldering must be done on non-combustible surfaces. Make sure any material
in the vicinity can not be damaged by the heat.
When the device can no longer be operated safely, disconnect it immediately
and secure it against being operated unintentionally.
It can be assumed that safe operation is no longer possible if:
• the device exhibits visible damage;
• the device no longer works;
• it has been stored for a long lime under unfavorable conditions;
• the device was exposed to extraordinary stress caused by transport.
Operation
Unpack the soldering station and check all parts. Damaged parts may not be put
in to operation.
Put the holding rack for the soldering iron sideways in the soldering station,
wet the cleaning sponge in the sponge rack with water.
Put the soldering iron tin the holding rack.
Place the soldering station on a solid and dry surface.
Connect the mains plug to a socket and turn on the soldering station by using
the power switch (I=ON / 0=OFF). When turned on, the power switch is lit.
www.tmatlantic.com
3
Advertisement
