Download Print this page

Safety Instructions - Aktakom ASE-1112 Instruction Manual

Temperature controlled soldering station

Advertisement

On first use the soldering iron may produce smoke, this is just grease used in
manufacturing burning off, it is not harmful to the product or user.

Safety Instructions

The construction of the soldering station meets Protection Level I. Ensure the
earth conductor is not disconnected and the product is only connected to
earthed sockets.
Keep electrical appliances and accessories away from children! They are not
toys.
Never use the product immediately after it has been brought in from the cold
into a warm room.
Condensation might destroy your device. Wait until the product is at room
temperature before use. Never touch the appliance with damp or wet hands
there is the risk of a dangerous electrical shock.
Make sure to have sufficient ventilation while soldering; solder or solder flux
can be harmful.
Wash your hands thoroughly after working with solder containing lead; do not
let solder containing lead cross your lips; do not cat during the work.
The power cables (power cable and cable to soldering iron) have to
be protected against heat and sharp edges.
Wear appropriate protective clothing and safety goggles while soldering.
2
www.tmatlantic.com

Advertisement

loading