Sony KLV-19T400A Service Manual page 91

Dual Sound
Screen menu
Press MENU and select "Settings". Press
• "Screen" menu is not available for FM Radio mode and PC input mode. When receiving PC signal, you can use "PC
Settings" menu to perform related settings (page 30).
Wide Mode
Auto Wide
4:3 Default
Selects the sound from the speaker for a stereo or bilingual broadcast.
The selection varies, depending on the Broadcasting.
Broadcasting
NICAM stereo
NICAM bilingual
NICAM monaural
A2 (German) stereo
A2 (German) bilingual
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM programme, select "Mono".
The sound becomes monaural, but the noise is reduced.
• The "Dual Sound" setting is memorised for each programme position.
• You cannot receive a stereo broadcast signal when "Mono" is selected for the
programme position.
z • NICAM is receivable in following countries/regions. Hong Kong, Singapore, New
Zealand, Malaysia, Thailand, etc.
• A2 (German) is receivable in following countries/regions. Australia, Malaysia,
Thailand, etc.
• If you select other equipment connected to the TV, set "Dual Sound" to "Stereo",
"Main" or "Sub". However, when the external equipment connected to the HDMI
jack is selected, this is fixed to "Stereo", except HDMI IN with DVI analogue
sound input.
• If you access to FM Radio mode, set "Dual Sound" to "Stereo" or "Mono".
F/f
to select the "Screen" icon (
For details about the wide mode, see page 16.
Automatically changes the wide mode according to the input signal from an external
equipment. To keep your setting, select "Off".
• "Auto Wide" is only available when watching programmes from video input and
HDMI input.
z • Even if "Auto Wide" is set to "On" or "Off", you can always modify the format of
the screen by pressing
Selects the default screen mode for use with 4:3 broadcasts.
"Wide Zoom": Displays conventional 4:3 broadcasts with an imitation wide screen
effect.
"Normal": Displays conventional 4:3 broadcasts in the correct proportions.
"Off": Keeps the current "Wide Mode" setting when the channel or input is
changed.
• "4:3 Default" is available only if "Auto Wide" is set to "On".
• "4:3 Default" is not available when watching TV programmes, component input
or for HD input signal.
Selection
Stereo (stereo sound)
Mono (regular sound)
Main (main sound)
Sub (sub sound)
Mono (regular sound)
Main (main sound)
Mono (regular sound)
Stereo (stereo sound)
Mono (regular sound)
Main (main sound)
Sub (sub sound)
), then press
repeatedly.
.
Continued
27
GB