Wire Harness Dressing; Connector Assy 4P, 11P, Sp Conn Assy 4P And 5P* Dressing - Sony KLV-19T400A Service Manual

KLV-19T400A,T400G,T400W
RM-GA013

4-1-8. Wire Harness Dressing

3) Dress SP Conn Assy 4P; Conn Assy 11P and Conn Assy 4P using Sheet Core, C as shown.
4) Insert Conn Assy 4P; Conn Assy 11P; SP Conn Assy 4P and
Conn Assy 5P* (for 19T400W model only) into Purse Lock (S) Ø 12.
SP Conn Assy 4P

4-1-9. Connector Assy 4P, 11P, SP Conn Assy 4P and 5P* Dressing

1) Dress Conn Assy 4P; Conn Assy 11P; SP Conn Assy 4P and Conn Assy 5P* (for 19T400W) using Sheet Core, C as shown.
2) Use pin, wire A6204 to wire dress all wires keep it away from rear cover screw hole.
Pin, wire A6204
Sheet Core, C
Conn Assy 11P
Conn Assy 4P
Caution: Dress all wires below panel's height limit.
Ensure that wires do not block screw hole
(prevent them from being sandwiched when inserting screw to rear cover)
Conn Assy
Conn Assy
19T400A models
19T400W models
19T400G models
Rear cover screw hole
SP Conn Assy 4P
Ensure both Conn Assy 11P
and Conn Assy 4P are dressed
towards the left (below J-bracket)
Figure a
*For 19T400W model onl
– 12 –
19T400A models
3 Sheet Core,C
19T400G models
*19T400W models
Conn Assy 5P*
4
Purse Lock (S) Ø 12
Rear cover screw hole
Sheet Core, C
Conn Assy 11P
Conn Assy 4P
y
Figure 9
Pin, wire A6204
Bend Conn Assy 5P*
towards the right before
dressing
SP Conn Assy 4P
Figure b