Electrical Connection - Beko WNF 8447 ACE50 Operating Instructions Manual

Adjusting the feet
In order to ensure that the product operates more silent and
A
vibration-free, it must stand level and balanced on its feet.
Balance the machine by adjusting the feet. Otherwise, the
product may move from its place and cause crushing and
vibration problems.
1. Loosen the lock nuts on the feet by hand.
2. Adjust the feet until the product stands level and balanced.
3. Tighten all lock nuts again by hand.
Do not use any tools to loosen the lock nuts. Otherwise, they
A
will get damaged.

Electrical connection

Connect the product to a grounded outlet protected by a fuse
complying with the values in the "Technical specifications" table.
Our company shall not be liable for any damages that will arise
when the product is used without grounding in accordance with the
local regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after installation.
• The voltage and allowed fuse or breaker protection are
specified in the "Technical specifications" section. If the
current value of the fuse or breaker in the house is less than
16 Amps, have a qualified electrician install a 16 Amp fuse.
• The specified voltage must be equal to your mains voltage.
• Do not make connections via extension cables or multi-plugs.
Damaged power cables must be replaced by the Authorized
B
Service Agents.
First use
Before starting to use the product, make sure that all preparations
are made in accordance with the instructions in sections "Important
safety instructions" and "Installation".
To prepare the product for washing laundry, perform first operation
in Drum Cleaning programme. If your machine is not featured with
Drum Cleaning programme, use Cottons-90 programme and select
Additional Water or Extra Rinse auxiliary functions as well. Before
starting the programme, put max. 100 g of powder anti-limescale
into the main wash detergent compartment (compartment nr.
II). If the anti-limescale is in tablet form, put only one tablet into
compartment nr. II. Dry the inside of the bellow with a clean piece of
cloth after the programme has come to an end.
Use an anti-limescale suitable for the washing machines.
C
Some water might have remained in the product due to the
C
quality control processes in the production. It is not harmful
for the product.
Disposing of packaging material
Packaging materials are dangerous to children. Keep packaging
materials in a safe place away from reach of the children.
Packaging materials of the product are manufactured from
recyclable materials. Dispose of them properly and sort in
accordance with recycled waste instructions. Do not dispose of
them with normal domestic waste.
Transportation of the product
Unplug the product before transporting it. Remove water drain and
water supply connections. Drain the remaining water in the product
completely; see, "Draining remaining water and cleaning the pump
filter". Install transportation safety bolts in the reverse order of
removal procedure; see, "Removing the transportation locks".
Never move the product without the transportation safety
C
bolts properly fixed in place!
Disposing of the old product
Dispose of the old product in an environmentally friendly manner.
Refer to your local dealer or solid waste collection centre in your
area to learn how to dispose of your product.
For children's safety, cut the power cable and break the locking
mechanism of the loading door so that it will be nonfunctional
before disposing of the product.
3 Preparation
Things to be done for energy saving
Following information will help you use the product in an ecological
and energy-efficient manner.
• Operate the product in the highest capacity allowed by the
programme you have selected, but do not overload; see,
"Programme and consumption table".
• Always follow the instructions on the detergent packaging.
• Wash slightly soiled laundry at low temperatures.
• Use faster programmes for small quantities of lightly soiled
laundry.
• Do not use prewash and high temperatures for laundry that
is not heavily soiled or stained.
• If you plan to dry your laundry in a dryer, select the highest
spin speed recommended during washing process.
• Do not use detergent in excess of the amount recommended
on the detergent package.
Sorting the laundry
• Sort laundry according to type of fabric, colour, and degree of
soiling and allowable water temperature.
• Always obey the instructions given on the garment tags.
40
EN