Auxiliary Function Selection - Beko WNF 8447 ACE50 Operating Instructions Manual

Auxiliary function selection

Select the desired auxiliary functions before starting the
programme. Furthermore, you may also select or cancel auxiliary
functions that are suitable to the running programme by pressing
the Start / Pause / Cancel button when the machine is operating.
For this, the machine must be in a step before the auxiliary function
you are going to select or cancel.
Depending on the programme, press a, b, c or d buttons to select
the desired auxiliary function. Symbol of the selected auxiliary
function appears on the display.
Some functions cannot be selected together. If a second
C
auxiliary function conflicting with the first one is selected
before starting the machine, the function selected first will
be canceled and the second auxiliary function selection
will remain active. For example, if you want to select Quick
Wash after you have selected the Prewash, Prewash will be
canceled and Quick Wash will remain active.
An auxiliary function that is not compatible with the
C
programme cannot be selected. (See "Programme and
consumption table")
Auxiliary Function buttons may vary according to the model
C
of the machine.
• Voorwas (Prewash)
A Prewash is only worthwhile for heavily soiled laundry. Not using
the Prewash will save energy, water, detergent and time.
F1 appears on the display when you select this function (a).
• Express Wassen (Quick Wash)
This function can be used in Cottons and Synthetics programmes.
It decreases the washing times and also the number of rinsing
steps for lightly soiled laundry.
F2 appears on the display when you select this function.
When you select this function, load your machine with half of
C
the maximum laundry specified in the programme table.
• Extra Spoelen (Rinse Plus)
This function enables the machine to make another rinsing in
addition to the one already made after the main wash. Thus, the
risk for sensitive skins (babies, allergic skins, etc.) to be effected by
the minimal detergent remnants on the laundry can be reduced.
F3 appears on the display when you select this function .
• Anti-kreuk (Anti-Creasing)
This function creases the clothes lesser when they are being
washed. Drum movement is reduced and spinning speed is limited
to prevent creasing. In addition, washing is done with a higher
water level.
F4 appears on the display when you select this function.
• Rinse Hold
If you are not going to unload your clothes immediately after the
programme completes, you may use rinse hold function to keep
your laundry in the final rinsing water in order to prevent them from
getting wrinkled when there is no water in the machine. Press Start
/ Pause / Cancel button after this process if you want to drain the
water without spinning your laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed
and press Start / Pause / Cancel button.
The programme resumes. Water is drained, laundry is spun and
the programme is completed.
The Soaking auxiliary function ensures better removal of stains
ingrained into the clothes by holding them in the detergent water
prior to startup of the programme.
Time display
Remaining time to complete the programme appears on the
display while the programme is running. Tim is displayed as
" 01:30 " in hours and minutes format.
Programme time may differ from the values in the
C
"Programme and consumption table" depending on the
water pressure, water hardness and temperature, ambient
temperature, amount and the type of laundry, auxiliary
functions selected and the changes at the mains voltage.
Delayed start
With the Delayed Start function the startup of the programme may
be delayed up to 24 hours. Delayed start time can be increased by
increments of 30 minutes.
Do not use liquid detergents when you set Delayed Start!
C
There is the risk of staining of the clothes.
Open the loading door, place the laundry and put detergent, etc.
Select the washing programme, temperature, spin speed and,
if required, the auxiliary functions. Set the desired delayed start
time by pressing the Delayed Start + or - buttons. Delayed Start
symbol flashes. Press Start / Pause / Cancel button. Delayed start
countdown starts. Delayed Start symbol illuminates steadily. Start
symbol appears. ":" sign in the middle of the delayed start time on
the display starts flashing.
Additional laundry may be loaded during the delayed start
C
period. At the end of the countdown, Delayed Start symbol
disappears, washing cycle starts and the time of the selected
programme appears on the display.
Changing the delayed start period
If you want to change the time during countdown:
Press Start / Pause / Cancel button. ":" sign in the middle of the
delayed start time on the display stops flashing. Pause symbol
appears. Delayed Start symbol flashes. Start symbol disappears.
Set the desired delayed start time by pressing the Delayed Start
+ or - buttons. Press Start / Pause / Cancel button. Delayed Start
symbol illuminates steadily. Pause symbol disappears. Start symbol
appears. ":" sign in the middle of the delayed start time on the
display starts flashing.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start the
programme immediately:
Press Start / Pause / Cancel button. ":" sign in the middle of the
delayed start time on the display stops flashing. Start symbol
disappears. Pause symbol and Delayed Start symbol flashes.
Decrease the delayed start time by pressing the Delayed Start -
button. Programme duration appears after 30 minutes. Press Start
/ Pause / Cancel button to start the programme.
Starting the programme
Press Start / Pause / Cancel button to start the programme. Start
symbol showing the startup of the programme will turn on. Loading
door is locked and Door Locked symbol appears on the display. The
symbol of the step from which the programme has started appears
on the display (Prewash, Main Wash, Rinse, Softener and Spin).
Progress of programme
Progress of a running programme is indicated on the display with
a set of symbols.
Relevant symbol appears on the display at the beginning of each
programme step and all symbols remain lit at the end of the
programme. The farthermost right symbol indicates the current
programme step.
Prewash
If the Prewash auxiliary function is selected, Prewash symbol
appears on the display indicating that the prewash step has
started.
48
EN