Table of Contents
Advertisement
UNCR ATING (CONT.)
6. Slightly raise the rear leveling leg rollers. Turn the
front adjustment screw 1/4-1/2 turn clockwise.
See fig. 9.
7. With assistance, pull the unit off the back of the
pallet. Then, remove the pallet and Carefully guide
the unit to a fully upright position. See fig. 10.
C AU T ION!
moving equipment from the unit's sides,
never the front or rear. See fig. 11. Failure
to do so may result in personal injury or
appliance damage. Do not lift the unit by handles,
doors, or hinges.
Page 20 of 56
T RU E R E S I D E N T I A L
I N S T A L L A T I O N
Only lift with appliance
®
adjustment screw
FIG. 9.
Adjustment screw location. Other adjustment screw not shown.
FIG. 10a.
With assistance, carefully walk the appliance partially off the
back of the skid.
1
2
FIG. 10b.
Then, tilt the unit
backward and remove the skid.
Only lift with appliance moving equipment from the SIDES,
FIG. 11.
NEVER
FRONT
or REAR. Take care to avoid damaging the icemaker.
the
P# 82 91 0 2
10/30/2023
1/4 – 1/2 turn
shipping bracket
FIG. 10c.
Carefully guide the
appliance to an upright position.
TEC_TM_151 | REV. E | EN
Advertisement
Table of Contents
