Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
3RULSM52XXXD Series Fan
cETL Model NO. : 3RULSM52XXD
RETAILER NAME:
RETAILER ADDRESS:
6.35 kg
14 lbs
Total fan weight with light
Advertisement
Related Manuals for Monte Carlo Fan Company 3RULSM52HABD
Summary of Contents for Monte Carlo Fan Company 3RULSM52HABD
- Page 1 Owner’s Guide and Installation Manual 3RULSM52XXXD Series Fan cETL Model NO. : 3RULSM52XXD Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 6.35 kg 14 lbs Total fan weight with light...
-
Page 2: Cautions And Warnings
Cautions and Warnings WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, FOLLOW THESE INSTRUCTIONS. Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70), including fire-rated construction. - Page 3 Before you begin installing the fan, Switch Before installing this fan make sure the Use metal outlet box suitable for fan power off at Service panel and lock outlet box is properly installed to the support and use only the screws provided service disconnecting means to prevent house structure.
- Page 4 SAFETY CABLE INSTALLATION Lag screw Cross pin Safety cable Slot Keeper pin Washer Lock washer Slip downrod into motor housing yoke, Install ball end of downrod into mounting Safety cable must be installed into the aligning holes and install cross pin and bracket opening.
- Page 5 Step screw Blade Step screw Plate on motor Partially loosen one and remove one Install the blade by using the set screws Loosen 2 and remove 1 preassembled preassembled step screw from mounting provided. Align the 3 holes on in the screw from the plate on motor.
- Page 6 Install Blanking Plate Light shade Blanking plate Attach the light shade by locating dimples Isolate the quick connects with electrical in light pan with grooves on the light tape. shade and twist clockwise until tight. Attach blanking plate by locating dimples in light pan with grooves on the blanking plate and twist clockwise until tight.
- Page 7 Remote Controller Operation Remove the battery cover from the remote control transmitter and install batteries. Replace the cover. This remote uses 2 1.5V/AAA batteries. Note: If not using for long periods of time, remove the batteries to prevent damage to DIM (D) remote controller, and store the remote controller away from excess heat or humidity.
- Page 8 Install Transmitter wall mount cradle with 2 screws provided. Useful tips: The remote transmitter can be removed by pressing it upward from the lower half. The remote transmitter can be held on magnetic metal materials by a magnet built in the transmitter. The receiver provides the following protective functions: Lock protection: The DC motor has a build-in safety feature Wall mount cradle...
- Page 9 Fan operation with Bond Home APP Download the Bond Home app with your smart devices. The app is available on the Google Play Store and Apple Store. Or get it from bond home link, http://bondhome.io/app Create a new account following on-screen operating steps. Make the fan (Smart by Bond wi-fi...
-
Page 10: Troubleshooting
Troubleshooting or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, installation, please call our Customer Service Center at the number printed on your parts list insert sheet. Warning and lock the service panel to prevent the power from being switched back on accidentally. If the service panel cannot be locked to prevent the power from being switched on accidentally, securely fasten a warning sign to the service panel. - Page 11 Mar.2022...