Note; Safety Instructions - Technaxx TX-265 User Manual

Note

⚫ Only use the product for purposes due to its intended function ⚫ Do not damage
the product. Following cases may damage the product: Incorrect voltage, accidents
(including liquid or moisture), misuse or abuse of the product, faulty or improper
installation, mains supply problems including power spikes or lightning damage,
infestation by insects, tampering or modification of the product by persons other than
authorized service personnel, exposure to abnormally corrosive materials, insertion of
foreign objects into the unit, used with accessories not preapproved. ⚫ Refer to and
heed all warnings, precautions and safety instructions in the user manual.

Safety instructions

⚫ Read the user manual carefully. They contain important information on the use,
safety and maintenance of the device. Keep the user manual in a safe place and pass
them on to subsequent users if necessary.
⚫ Before installing or using the Solar Balcony Power Plant, please read all instructions
and warnings in the technical documentation, on the microinverter and on the solar
modules.
⚫ The device may only be used for its intended purpose in accordance with this user
manual.
⚫ Observe the safety instructions during use.
⚫ Before commissioning, check the device and its connecting cable as well as
accessories for damage. Do not use the device if it shows visible damage.
⚫ Operate the device only from household power sources. Check whether the mains
voltage specified on the type plate corresponds to that of your mains supply.
⚫ Perform all electrical installations in accordance with local regulations (including
VDE).
⚫ When installing and operating the plug-in photovoltaic system, observe the national
legal regulations and the connection conditions of the grid operator.
In particular, DIN VDE V 0100-551-1 (VDE V 0100-551-1), VDE AR-N 4105:2018-11,
DIN VDE 0100-712, DIN VDE 0100-410 and DIN VDE V 0628-1 (VDE V 0628-1).
⚫ Note the information on determining the line reserve at the end of these operating
instructions.
⚫ Note that the housing of the micro inverter is a heat sink and can reach a
temperature of 80 degrees Celsius. To reduce the risk of burns, do not touch the
housing of the micro inverter.
⚫ Do not squeeze the power cord, do not pull it over sharp edges or hot surfaces; do
not use the power cord for carrying.
⚫ If the power cord of this device is damaged, it must be replaced by the manufacturer
or its customer service or a similarly qualified person in order to avoid hazards.
⚫ The appliance is intended for household or similar use only. It must not be used for
commercial purposes!
⚫ Make sure that the device is well secured during operation and cannot be tripped
over by cables.
⚫ Never use the device after a malfunction, e.g. if the device has been dropped into
water or damaged in any other way.
4
Model: TX-265; Article No. 5104; 10/2023