Hisense I6433CB7 Detailed Instructions page 38

Glass ceramic built-in induction cooking hob
Table of Contents

Advertisement

1. Silicone sealant, 2. Sealing tape
2. Removing the built-in appliance:
Disconnect the appliance from the power mains.
Use a suitable tool to remove the silicone gasket from the perimeter. Remove the
appliance by pushing it upwards from the bottom side.
Stone countertop
1
3
5,5
1 - Countertop
2 - Appliance
3 - Slot
Given the margin of error (tolerance) for the glass ceramic plate of the appliance, and the
cutout in the countertop, the slot is adjustable (min. 2 mm).
38
2
1
Pay particular attention to built-in dimensions with (natural)
stone countertops. When choosing the silicone sealant,
observe the countertop material and consult the countertop
manufacturer. Use of inappropriate silicone sealants can result in
permanent discolouration of some parts.
Do not attempt to remove the appliance from the upper side of
the counter!
The service department shall only be responsible for repair and
servicing of the cooking hob. Consult your specialised kitchen
equipment dealer regarding the re-installation of the flush-mount
cooking hob.
2
4
54
16
56
1

Advertisement

Table of Contents
loading

Table of Contents