Lead Vehicle Start Alert - Subaru Impreza 2017 Owner's Manual

Lead Vehicle Start Alert

This function notifies the driver by means of a buzzer and the lead vehicle indicator on the
combination meter display when the driver's vehicle remains stopped after the vehicle in
front has started to move forward. When the vehicle in front remains stopped continuously
(within a following distance of approximately 32 ft (10 m) and the driver's vehicle remains
stopped for several seconds or longer), the system continues to detect the vehicle in front
and this alarm activates if the vehicle in front advances approximately 10 ft (3 m) or more
while the driver's vehicle remains stationary.
This function only activates when the select lever is in the
When the Lead Vehicle Start Alert activates, a buzzer sounds a two-tone beep, and inter-
ruption screens are displayed.
Lead
vehicle
Two-tone beep
Even after alerts are given audibly and through the display of an indicator, be
sure to carefully check the area surrounding the vehicle before pulling away.
Relying only upon the Lead Vehicle Start Alert may result in an accident.
The Lead Vehicle Start Alert setting can be turned on or off.
Refer to page 90.
Under the following conditions, the Lead Vehicle Start Alert may activate
even when the vehicle in front has not started to move, or may not activate
even after the vehicle in front has started to move:
- A motorcycle or similar object has cut in between your vehicle and the
stopped vehicle in front.
- Weather or road conditions prevent detection of the vehicle in front.
- The EyeSight stereo camera loses detection of the vehicle in front.
Lead
vehicle
10 ft (3 m)
or more
S01266
WARNING
NOTE
Lead Vehicle Start Alert
D M N
, or position.
Vehicle Ahead
Has Moved
S02411
73