Subaru Impreza 2017 Owner's Manual page 79

How to use the Conventional Cruise Control
Conventional Cruise Control can be set when the following conditions are met.
- The select lever is in the
- The brake pedal is released.
- The vehicle speed is between approximately 20 MPH (30 km/h) and 90 MPH (145
km/h).
- Parking brake is released.
■ Setting Conventional Cruise Control
(1) Setting the Conventional Cruise Control to standby status.
Press the
"following distance setting" are displayed on the EyeSight display area of the
combination meter display. The set vehicle speed display will read "- - MPH".
When the
Adaptive Cruise Control.
If the switch is pressed once more, the EyeSight display will turn off. It will also automatically
turn off when the engine is stopped.
D M
or
(CRUISE) switch. At this time,
(CRUISE) switch is pressed, the initial cruise control mode is always
S02390
position.
(Adaptive Cruise Control) and the
Conventional Cruise Control
S02391
75