Subaru Impreza 2017 Owner's Manual page 80

Conventional Cruise Control
(2) Switch to Conventional Cruise Control.
Press and hold the
seconds or longer to switch from Adaptive Cruise Control to Conventional Cruise Control.
A buzzer sounds 1 short beep.
At this time, the following distance setting indicator on the EyeSight display area of the
combination meter display turns off and
To set the ready status:
Conventional Cruise Control can be set when all of the following conditions are met and
is displayed on the EyeSight display area.
- All doors (except the rear gate/trunk) are
closed.
- The driver's seatbelt is fastened.
- The select lever is in the
position.
- The brake pedal is not depressed.
- The road is not on a steep slope.
- The steering wheel has not been turned
significantly in either direction.
- The vehicle
approximately 20 MPH (30 km/h) and 90
MPH (145 km/h).
- Parking brake is released.
(3) Control the accelerator pedal to reach the desired speed.
76
/ (following distance setting) switch for approximately 2
S02398
D or
speed is between
is displayed.
M
S02413
S02412