Lead Vehicle Start Alert - Subaru 2016 Outback Owner's Manual

Lead Vehicle Start Alert

This function notifies the driver by means of a buzzer and the lead vehicle indicator on the
multi information display when the driver's vehicle remains stopped after the vehicle in front
has started to move forward. When the vehicle in front remains stopped continuously (within
a following distance of approximately 32 ft (10 m) and the driver's vehicle remains stopped
for several seconds or longer), the system continues to detect the vehicle in front and this
alarm activates if the vehicle in front advances approximately 10 ft (3 m) or more while the
driver's vehicle remains stationary.
This function only activates when the select lever is in the
When the Lead Vehicle Start Alert activates, a buzzer sounds a two-tone beep and the lead
vehicle indicator moves.
Lead
vehicle
Two-tone beep
• The Lead Vehicle Start Alert setting can be turned on or off.
⇒
Refer to page 89.
• Under the following conditions, the Lead Vehicle Start Alert may activate
even when the vehicle in front has not started to move, or may not activate
even after the vehicle in front has started to move:
- A motorcycle or similar object has cut in between your vehicle and the
stopped vehicle in front.
- Weather or road conditions prevent detection of the vehicle in front.
- The EyeSight stereo cameras lose detection of the vehicle in front.
74
Lead
vehicle
10 ft (3 m)
or more
S01266
NOTE
D M N
, or position.
Vehicle Ahead
Has Moved
S01128