Subaru Impreza 2017 Owner's Manual page 23

switch/
■
These are used in the following situations.
When switching the screen displayed on the combination meter display.
When changing the Warning Volume settings, etc.
Refer to page 90.
(Info)/SET switch
■
This is used in the following situations.
When displaying the message that appeared in the warning screen area again.
Refer to page 92.
When changing the Warning Volume settings, etc.
Refer to page 90.
(Pre-Collision Braking System OFF) switch
■
Press and hold this switch for approximately 2
seconds or longer to turn off the Pre-Collision
Braking System and Pre-Collision Throttle
Management.
When these functions are off, the Pre-Colli-
sion Braking System OFF indicator light on
the instrument panel illuminates.
Press and hold the switch again to turn on the
Pre-Collision Braking System and Pre-Colli-
sion Throttle Management. This turns off the
Pre-Collision Braking System OFF indicator
light.
Refer to page 31.
(Lane Departure Warning OFF) switch
■
Press and hold this switch for approximately 2
seconds or longer to turn off the Lane Depar-
ture Warning and Lane Sway Warning func-
tions.
When these functions are off, the Lane
Departure Warning OFF indicator light on the
instrument panel illuminates.
Press and hold the switch again to turn on the
Lane Departure Warning and Lane Sway
Warning functions. This turns off the Lane
Departure Warning OFF indicator light.
Refer to page 69.
switch
About EyeSight
S02387
S02388
19